The LCD screen provides information on current temperatures and mode of operation, as well as the date and time. Illumination is optional, it can be switched on or off.

Mode of operation. The Thermostat has four operation modes programmed:
– comfort mode: the temperature is set to a value providing normal (comfortable) use of the room. This mode is selected by pressing the top left button.
– night mode (standby): the room is not used for a longer time during the night, so the thermostat reduces the temperature, returning to the comfortable value in the morning. This mode is selected by pressing the top right button.

– protection against freezing: the thermostat is not controlled manually in this mode. Heating is engaged only when the temperature in the room is so small that there is a risk of freezing of the heating system. This mode is selected during programming of the thermostat.

Temperature adjustment is possible via the bottom button. Pressing its left side we raise the expected temperature value, pressing the right side – we reduce it, irrespective of the current mode of operation of the thermostat.

Status LEDs – the diodes serve as an illumination light, enabling readout of the data in the night. They can be on or off continuously, depending on the options programmed.

Lighting control. If only one lamp is assigned to a button, then pressing its right end will switch it on (make it brighter), and the left end – switch it off (dim it). If two different lamps (or other functions) are assigned to a button, then the left and right buttons switch a given lamp or function independently, without the option of brightness adjustment.

Scenes. A scene is started through a short press of the end of a given button. If we want to switch it off we select another scene or choose 'general off’.

Heating control. Upon pressing of an operation mode selection button, the left end of the first button will reduce the temperature value, and the right end will increase it. In order to select a mode of operation one needs to press the selection button, and then the left end of another button to choose comfort mode or the right end to select economic mode.

Window blind control. A long press of the right end of the button will raise the blind all the way, and of the left end – will close it fully. A short press will make the movement stop at the current height.

Remote (infra-red) control. Thanks to the IR receiver built into the console one has the option to control the consoles from the remote unit. The remote unit has two channels (white and blue), thanks to which one can use it to control two consoles in a room – all it takes is to pick a channel (option not available in three-button console with thermostat).

Operating mode selection button. Starts the thermostat settings, switches off the diodes and illuminates the description fields. To set the illumination of description fields one needs to press the selection button, and then an end of the third button.

Display/Thermostat. Shows messages on the state of any selected appliance or the temperature or heating working mode.

Status LEDs. The diodes may serve as guiding lights or show the state of a device or i. e. a lamp by changing colour.

Lighting control. If only one lamp is assigned to a button, then a long press of the right end will switch it on (make brighter), and a long press of its left end will switch it off (dim it). If two different lamps (or other functions) are assigned to a button, then the left and right ends will independently switch it on (short press) or make brighter (long press), or vice versa – switch it off or dim it.

Scenes. A scene is started through a short press of the end of a button. If we want to switch it off just select another scene or press 'general off’.                                     

Heating control. Upon pressing the display (this will cause the menu to show), pressing the left end of the top button will reduce the given temperature, and pressing the right end will increase it. In order to set the desired mode of operation (comfort, standby-economy, night) one needs to press the display several times and pick the desired mode from the menu using the left or right end of the display button. To change the temperature values assigned to each mode simply select the menu, pick the desired heating or air conditioning option and set the new temperature using the ends of the display. When entering the settings, the left side of the display is used to conform a selection, and the right end – to go to the next option. To come back from the functions and menu one needs to press any end of any button of the console.                                                                                                                                                                                                                                                                                                          

Window blind control. A long press of the end of a button will raise/lower the blind completely. A short press will pause the movement in the current position.

Remote (infra red) control. Thanks to the IR sensor built into the console one has the option to control the buttons via the remote control unit. The remote unit has two channels (white and blue), thanks to which one can control two consoles in a single room – all it takes is to select a different channel (this option is not available in consoles without a built-in thermostat).

Display. Shows messages on the operation of a selected appliance, temperature, mode of operation or date and time. It starts up the thermostat or own illumination. To switch the illumination on or off one has to select the menu (press the display), then use its right end go to settings and select activation or deactivation of display illumination. In the settings one can also activate key locks in this way.

Status LEDs – illumination diodes for the descriptions are found under the buttons, they can serve as guiding lights informing about the status of a device, i. e. whether a particular lamp is on. Depending on the programming their illumination can be continuous or timed, i. e. lasting 20 seconds after the press of any button.

Lighting control. A short press of a button will switch the lamp on or off, a longer press will make it shine brighter or dim it.

Scenes. A scene is selected by a short press of a button. To switch it off simply select another scene or choose 'general off’.

Heating control. Upon the press of the display, pressing its left end the current temperature value is reduced, while pressing the right end increases the temperature value.

Window blind control. A long press will raise/lower the window blind all the way. A short press will pause the movement at the current height.

Thermostat. Provides information and is itself a button with which one can alter temperature settings, and program operation modes, functions and periods of activity via the mini-menu. The menu is called by pressing the middle bottom part of the display and going to the various functions:
Changing the required temperature was shown above at 'Heating control’.
Changing the operating mode allows (via selection of the options b0, b1, b2) setting respectively the heating operation mode: night, standby (economy), comfort, protection against freezing.

Selection of free/working days is effected by the settings h0 – for off days, or h1 – for working days;then follows the programming of parameters for those days.

Display mode: allows the selection of the information to be shown: d0 – current temperature, d1 – programmed temperature, d2 – programmed and current temperature, alternating, d3 – date, d4 – time, d5 – date and time, alternating, d6 – current and required temperature as well as date and time alternating.

Display illumination: one can select the intensity of the illumination via a choice of settings from L0 to L9 (0 – darkest, 9 – brightest).

Time settings: this function allows the setup of operation times of selected lamps, outlets or window blinds controlled from the console.

Status LEDs. The diodes can serve as guide lights or show the state of a particular device or lamp through the change in colour.